The Sota Silver Pulser is housed in an attractive new custom plastic box, with a built-in compartment for the nine volt battery. A slide-off lid allows you to change the battery easily. A thumbwheel switch control knob turns the Silver Pulser on and off and varies the intensity of the micropulsing output. A green LED Light comes on when the Silver Pulser is turned on. Flashing yellow LED light on the unit indicates there is a correct micropulsing output and comes on only when current is flowing. Red LED Light indicates low battery. In addition, an orange LED light is used for the ionic-colloidal silver generation. The orange LED Light comes on when current through silver wires is correct. The Silver Pulser SP-7 has been newly upgraded with longer battery life AND a low battery indicator to ensure that you always operate on a full charge.

The Sota Silver Pulser has a convenient USB style jack for plugging in the fine silver wires, another for the micropulsing probes. A second jack is used for hooking up an AC-DC wall adaptor so you don't have to go through batteries when making ionic colloidal silver. We also include our newly designed, electrically conductive, rubber probe covers and cotton sleeves to slide over the micropulsing probes to help maintain a good and comfortable connection. The Sota Silver Pulser is packaged in a custom soft carrying case for easy storage.

Each Silver Pulser is a professionally designed quality instrument, thoroughly tested on an oscilloscope and is guaranteed to operate as per the specifications.  The Silver Pulser has a dual-function design, being both a Micropulser and Ionic Colloidal Silver Generator.  The Silver Pulser generates the finest quality ionic colloidal silver at a rate of 5-8 ppm (part per million) in two hours per 16 ounces of distilled water, with an ionic colloidal silver particle size that is mostly ions, with colloidal particles in the range of 0.005 - 0.015 microns (verified on a scanning electron microscope).  It has a bi-phasic square wave form output frequency of ~3.92 Hertz (cycles per second) at a nominal voltage of 31 volts DC peak per cycle.   Peak to peak voltage is 62 volts. Unit uses a single 9-volt battery. The Sota Silver Pulser circuit board is gold plated for the highest quality and performance. All solders and fluxes are food-grade for highest safety and purity.

We offer the complete line of Sota products including the magnetic pulser, water ozonator and lightworks instruments. Read about these products on some of our other catalog pages.

The Original and Still the Best

Our customers can feel secure in the knowledge that the Sota Instruments Silver Pulser follows the most exacting specifications and quality control procedures, including the CE certification for electronic products sold in the European Union. Sota Instruments has been offering the highest quality products for over 20 years. We work tirelessly to earn your loyalty and to achieve the highest customer satisfaction

See a Youtube Silver Pulser Micropulsing Demonstration

http://www.youtube.com/watch?v=iSGgO4YKs_U

See a Youtube Silver Pulser Ionic Colloidal Silver Demonstration

http://www.youtube.com/watch?v=e92fjWGEAxk&feature=youtu.be

Sota Silver Pulser SP-7- $295.00 + shipping

Transformation Technologies
ORDER - (760) 363-5496
Email us at - vristo@earthlink.net

Shipping will be added at time of purchase. Overseas customers may be required to
pay additional import taxes. This varies according to each country or trade zone


Join the Sota Community

Members of the Sota Community have access to owners manuals and in-depth video instruction on using all of the Sota products. You also have access to the informative Sota Newsletter. Joining the Sota Community is easy! Just place your initial order using the ordering option number 1 below.
 

Making high-quality colloidal silver is now easier than ever.  The Silver Pulser comes with a custom retainer that is placed on top of your glass of water or other container.  The silver wires extend straight down into the water and are held in place by a spring-loaded clip.  Silver wire length is adjustable to fit the depth of your glass or container.  The silver wires are easy to remove and replace.  During the process of making colloidal silver, the positive silver wire loses silver and gradually shrinks in diameter.  By switching the positive and negative wires around, the usable life of the wires is doubled and you can make twice the amount of colloidal silver.

Silver Pulser Specifications

* Battery voltage: 9 volts DC (alkaline battery)
* Low Battery Indicator - to help you achieve consistent results
* Optional Input voltage: 6-12 volts DC @500mA wall transformer/adaptor, auto battery or solar panel
* Output voltage at colloidal silver wires: 31 Volts DC (+/- 1 Volt) constant voltage
* Output current at colloidal silver wires: 1.5 milliamps (+/- 0.5ma.) constant current output
* Output voltage at stimulator probes: 31 volts (peak per cycle, 62 volts peak-peak)
* Output current at stimulator probes: ~12 mA max. when probes shorted and control knob at full intensity
* Bi-phasic at ~3.92 Hertz +/- 1 Hz (this is one half the rate of the Schumann Frequency of 7.83 Hz.)
* Ionic colloidal silver production: 5-8 parts per million in two hours in 16 ounces of distilled water
* Ionic colloidal silver particle size: mostly ionic with colloidal particles in the range of 0.005 to 0.015 microns
* Ionic colloidal silver color: clear or pale gold when made as directed
* Silver Probes can make many gallons of 5 to 8 parts per million colloidal silver when used as directed
* One standard 9-volt alkaline battery (included)
* Three Year Parts and Labor Warranty

The fine Silver Wires are 14 AWG (1.63mm or 0.064" dia.) x 8" long (20cm) constructed of .9999 pure silver