LightWorks

Far Infrared Led Therapy



 

The LightWorks is designed to generate an intense, pulsating LED Light, utilizing the well-known frequencies of Dr. Paul Nogier. As a doctor and researcher in the 1970's, Dr. Nogier discovered 7 principal frequencies that the body responds to in terms of being able to effectively receive healing energy or to emit energy for diagnostic purposes.  These frequencies are listed in the chart below.  Nogier frequencies are all harmonics of the musical note D and all tissues of the body resonate to these frequencies.  When tissues or organs are out of vibratory balance, sickness or disease can eventually result.  By introducing specific frequencies and pulse rates of light, the body absorbs this energy as a type of informational code to help restore proper vibration and balance.  LightWorks does not directly treat any disease or illness.  It simply provides a form of photonic and infrared energy that the body's innate intelligence knows how to utilize.

The Hand Paddle has high intensity LEDs on both sides. One side has 60 x Red LEDs at a wavelength of 660nm. The other side of the Hand  Paddle has 55 x high intensity Near-Infrared (NIR) LEDs at a wavelength of  880nm. There are also 5 x Red LEDs at 660nm wavelength on the NIR side of the paddle to indicate the NIR LEDs are working as NIR light is invisible to the human eye. These frequencies are commonly used in more expensive Laser therapy systems and other Led Systems costing many hundreds to thousands of dollars.   The convenient hand paddle allows you to apply the Led energies to any area on the body.  The unit can also be used on dogs, cats, horses, etc.

 

Eight different selectable pulse Modes - Constant ON + settings A through G

 

The LightWorks unit will output a steady (non-pulsed) beam of LED light when in Constant Mode.  The LightWorks unit can pulse the LEDs at  seven specific healing frequencies (Modes A through G). Modes are selected with the ON/OFF/MODE button. The currently selected Mode is indicated by the appropriate Green Mode lights.

The unit starts up in the Automatic Cycle, running through each of the 8 Modes for 4 minutes per Mode. An Orange light on the base indicates the Automatic Cycle has been selected.

In the Manual Cycle the Constant Mode will stay on for  30 minutes, and Modes A through G will stay on for 15 minutes. When the LightWorks unit has completed a Manual or Automatic Cycle, it will shut itself OFF. The Hand Paddle Button on the base unit is used to select which side of the paddle is active.
 
 


 
 
 

The table indicates the Nogier Frequency of each Mode

And the Main Area of Influence for the Frequency

 

Mode Frequency  Main Area of Influence
A 292 Hz. Ectodermal - skin - nerves.  Known as the Universal Frequency in Acupuncture
B 584 Hz Gastrointestinal and Metabolic
Lymphatic and Circulatory
C 1,168 Hz Tendons, Ligaments, Muscles, Bones
D 2,336 Hz Imbalances of Laterality
E 4,672 Hz Spinal Cord and Nerve - C Fibers
F 73 Brain and Bone
Chronic, Recurring Problems
G 146 Cerebral Cortex and Mental Imbalances
Universal Frequency for Inflammation
Constant 0 (DC) No Frequency. Output is continuous / constant Muscle Relaxation
Automatic Auto-cycles for 4 minutes in each Mode (Constant, then A through G) All areas of influence

 
 

Which Side Should I Use

Generally speaking, the infrared wavelength of 880nm has been demonstrated to penetrate to approximately 30 to 40 mm. into tissues. This makes it more suitable for deep work such as bones, joints, muscles, etc.  The 660nm visible red led light is more shallow with a penetration depth around 8 to 10 mm.  This makes it more suitable for surface issues dealing with the skin and just below.

 


 

Specifications
 

  • Constant current of 20 milliamperes per LED (Constant current ensures each LED has the same output.)
  • 60 x High Intensity  Red LEDs at 660nm wavelength (+/- 10nm), Approximately 197mW Total Output 
  • 55 x High Intensity Near Infra-Red LEDs at 880nm wavelength (+/- 10nm), Approx. 228mW Total Output
  • Frequency tolerance: +/- 1Hz 
  • Power Input: 12 Volts DC @ 1.0 Amps - Universal AC Adapter for 110 VAC, 60 Hz. to 220 VAC, 50 Hz.
  • Red Led Output during 15 min. programs - (660nm side of applicator) = 88 Joules
  • Near Infrared Led Output during 15 min. programs - (880nm side of applicator) = 102 Joules
  • Warranty - 3 years on parts and labor
  • Automatic Shutoff with Audible beep indicator

Light Works - $265.00

Shipping - $15.00 - for U.S. & Canada, $40.00 International






Infrared Products - view by name


 



 

Home Page

Complete Products Listing Page with Links to All Product Pages

 

Ordering Lightworks

We do not offer on-line ordering. Please phone, or email your order.  Shipping time is normally within 5 to 7 days.  $10.00 shipping for U.S. Payment by Visa, M.C., American Ex. or Discover.  We also accept  PayPal & checks 

Transformation Technologies
4110 Lyceum Ave. L.A., CA. 90066

Toll Free 1-877-287-0912

(310) 823-7016
Fax (310)823-5028

E-Mail  vristo@earthlink.net